Autoclaved kettle is for new building materials such as gas, coal ash brick, block, pile microporous calcium silicate board, the new light wall material for high temperature and high pressure pipe of large pressure vessel.As the national policy for energy conservation and emissions reduction vigorously implement, more and more buildings began to use new building materials to reduce costs, improve the living environment, protect the environment, more and more manufacturers invest new building materials production, so how to select the type of reaction caldron in the aeroconcrete in investments to make it more conform to the principle of economy, the most competitive prices.
The effective length of reaction caldron in the aeroconcrete and kettle inside diameter size
At the time of selection, choose appropriate to the size of the autoclaved kettle can not only meet the needs of the production of the enterprise, also can save unnecessary expenses.Customers can according to their own annual production of aerated block or the size of the quantity of pipe pile length and diameter suitable autoclaved kettle.For example of 5 cubic aerated block production line with annual output of 10 cubic used by the size of reaction caldron in the aeroconcrete certainly is not the same, the bigger cost is high.
The maximum working pressure of reaction caldron in the aeroconcrete production
In production, the maximum working pressure of reaction caldron in the aeroconcrete said it can withstand the maximum load, in general, autoclaved kettle wall are more, the working pressure, the greater the load utility is stronger, the higher the price, of course.When the choice, should according to own century requires the rated working pressure.
Autoclaved boo boo startup mode of the door
Kettle door startup mode refers to the operation in the process of how to open the door of the kettle into the way of pipe products.Traditional way of kettle door start with human is given priority to, not only time-consuming, also prone to accidents, in order to solve this problem, Zheng Guo container has developed a high degree of automation of full automatic hydraulic, pneumatic, electric) to open the door, reaction caldron in the aeroconcrete realize low operation, also can remote control, open the light, smooth operation.Manual open autoclaved kettle price much lower than the high degree of automation of autoclaved kettle, customers can according to the actual demand and how much of the money kettle door model selection.
In the form of autoclaved boo boo door
there are two main types of reaction caldron in the aeroconcrete production the container kettle door: the side door autoclave reactor and opened the door on the autoclave reactor.Traditional forms of side door occupies large space area, covers an area of more than, cost relatively is high;On the door of reaction caldron in the aeroconcrete plant height requirement is not high, take up the space is small, less investment.Investment enterprise should according to the size of the plant area models were selected, and can reduce the price to the lowest.
The number of kettle door
Have a through type have a kettle is at each end (door) and end (kettle door at one end) in two forms, through type kettle door products into kettle time saving, high production efficiency, investment cost is high also, selection of customers according to actual situation.
没有评论:
发表评论